Hace algunos meses los de jazztel me ofrecieron adsl 20 Mb. Al final, por problemas en la línea, tras venir un técnico a la central y a mi casa, me lo dejaron en 3 Mb. Mi distancia a la central no es excesiva y en telefonica me dicen qe me dan 6 mb. Por eso me he cabreado y he llamado al 1565. Al final me dicen que efectivamente me pueden ofrecer los 6 Mb y que tardarían entre 24 y 72 horas en cambiarme la velocidad. Sim embargo a los pocos minutos el router ya sincronizaba a 5731 de bajada y 506 de subida. Bueno la cuestión es qe quisiera saber cual sería la configuración optima del router. Estos son los datos que saco del aparato, y como yo no tengo ni idea me gustaría que alguien me asesorara. Un saludo
Statistics -- ADSL
Mode: | ADSL2+ | |
Line Coding: | Trellis On | |
Status: | No Defect | |
Link Power State: | L0 | |
Downstream | Upstream | |
SNR Margin (dB): | 9.1 | 22.0 |
Attenuation (dB): | 37.5 | 15.6 |
Output Power (dBm): | 0.0 | 12.2 |
Attainable Rate (Kbps): | 5476 | 584 |
Rate (Kbps): | 5731 | 506 |
MSGc (number of bytes in overhead channel message): | 58 | 81 |
B (number of bytes in Mux Data Frame): | 13 | 13 |
M (number of Mux Data Frames in FEC Data Frame): | 16 | 16 |
T (Mux Data Frames over sync bytes): | 13 | 1 |
R (number of check bytes in FEC Data Frame): | 12 | 16 |
S (ratio of FEC over PMD Data Frame length): | 1.2437 | 13.1507 |
L (number of bits in PMD Data Frame): | 1518 | 146 |
D (interleaver depth): | 64 | 4 |
Delay (msec): | 19 | 13 |
Super Frames: | 60605 | 60603 |
Super Frame Errors: | 4 | 1 |
RS Words: | 3151488 | 257562 |
RS Correctable Errors: | 4027 | 0 |
RS Uncorrectable Errors: | 85 | N/A |
HEC Errors: | 4 | 0 |
OCD Errors: | 0 | 0 |
LCD Errors: | 0 | 0 |
Total Cells: | 13253138 | 1142837 |
Data Cells: | 73906 | 15985 |
Bit Errors: | 0 | 0 |
Total ES: | 3 | 1 |
Total SES: | 0 | 0 |
Total UAS: | 17 | 115 |
DSL SettingsSelect the modulation below.
G.Dmt Enabled |
G.lite Enabled |
T1.413 Enabled |
ADSL2 Enabled |
AnnexL Enabled |
ADSL2+ Enabled |
AnnexM DISABLED |
Select the phone line pair below.
Inner pair |
Outer pair |
Capability
Bitswap Enable |
SRA Enable |
en dsl settings tengo todo marcado menos "outer pair" y SRA Enable