Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
Prestige 650HW-31 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. LAN Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
Advanced Applications 25. IP Routing Policy Setup
11. Remote Node Setup 26. Schedule Setup
12. Static Routing Setup
15. NAT Setup
99. Exit
--------------------------------------------------------------------------- ----
Enter Menu Selection Number:
System Name= TELEFONICA
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
press ENTER to Confirm or ESC to Cancel:
--------------------------------------------------------------------------- --------
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 80.58.0.33
Secondary DNS Server= 80.58.32.97
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
--------------------------------------------------------------------------- ---------------
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 8
VCI #= 32
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= tu usuario@wanadooadsl
My Password= ********
Idle Timeout (sec)= 0
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
--------------------------------------------------------------------------- ----------
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name= internet
Incoming: Telco Option:
Rem Login= Allocated Budget(min)= 0
Rem Password= ******** Period(hr)= 0
Outgoing: Schedule Sets=
My Login= tu usuario@wanadooadsl Nailed-Up Connection= No
My Password= ******** Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 0
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:
--------------------------------------------------------------------------- -------------
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 filtro 7 _______________
2 NetBIOS_WAN 8 _______________
3 NetBIOS_LAN 9 _______________
4 IGMP 10 _______________
5 NetBIOS_WAN 11 WebSet1
6 _______________ 12 WebSet2
Enter Filter Set Number to Configure= 0
--------------------------------------------------------------------------- ---------------------
Menu 21.1 - Filter Rules Summary
pues asi deve quedar tu configuracion por telnet por ejemplo
esto es despues de actualizar el router a la 340KW4B1
si os dais cuenta lo del ppoe y tal no es el de wanadoo por defecto de configuracionfijarse que para wanadoo son estos los datos generales
Wanadoo PPPoA 8/35 VC-MUX tuidentificador@wanadooadsl Tu contraseña [62.37.237.140]
[62.37.236.252]
y tal y tal pero en este router que como savemos no es de wanadoo lo del ppoe hay que dejarlo como os lo pongo en la configuracion de arriva no asustarse que va de pm
si pude ser solo tocar esto que os pongo para los que no actualizen el firm del router en su configuracion solo cambiar el usuario y tu contrseña de wanadooy lo demas ni tocarlo ok saludos