Banda Ancha EU

Comunidad de usuarios
de fibra, móvil y ADSL

hosting en interdominios
45 lecturas y 2 respuestas
  • Cerrado

    [Editado 9/03/07 02:14]

    Sobre el firm nb8

    he montado el puerto serie y os pongo todo el log desde el flasheo hasta el aranque total del firm en 10m os pongo el log del comtrend con firm comtrend y luego el de asus

    CFE version 1.0.37-5.17 for BCM96348 (32bit,SP,BE)
    Build Date: Mon, 31 Jan 2005 23:36:28 +080
    Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

    Initializing Arena.
    Initializing Devices.
    Device id = 22a8
    totalBlks=71
    totalSize=4096K
    getShareBlks: i=70, sect_size=65536, end_blk=71
    getShareBlks: i=0, sect_size=8192, end_blk=1
    getShareBlks: i=0, sect_size=8192, end_blk=1
    fInfo.flash_nvram_start_blk = 0
    fInfo.flash_nvram_blk_offset = 0x580
    fInfo.flash_nvram_number_blk = 1
    psi startAddr = bfffa000
    fInfo.flash_persistent_start_blk = 70
    fInfo.flash_persistent_blk_offset = 0xa000
    fInfo.flash_persistent_number
    init 5325E: init mii=0
    init 5325E: init success, mii=9f
    getShareBlks: i=0, sect_size=8192, end_blk=1
    CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz

    Total memory used by CFE: 0x80401000 - 0x80522040 (1183808)
    Initialized Data: 0x8041C990 - 0x8041E400 (6768)
    BSS Area: 0x8041E400 - 0x80420040 (7232)
    Local Heap: 0x80420040 - 0x80520040 (1048576)
    Stack Area: 0x80520040 - 0x80522040 (8192)
    Text (code) segment: 0x80401000 - 0x8041C990 (113040)
    Boot area (physical): 0x00523000 - 0x00563000
    Relocation Factor: I:00000000 - D:00000000

    getShareBlks: i=0, sect_size=8192, end_blk=1
    getShareBlks: i=0, sect_size=8192, end_blk=1
    Board IP address : 192.168.1.1:ffffff00
    Host IP address : 192.168.1.100
    Gateway IP address :
    Run from flash/host (f/h) : f
    Default host run file name : vmlinux
    Default host flash file name : bcm963xx_fs_kernel
    Boot delay (0-9 seconds) : 1
    Board Id Name : 96348GW-11
    Psi size in KB : 24
    Number of MAC Addresses (1-32) : 11
    Base MAC Address : 00:30:da:74:9d:e5
    Ethernet PHY Type : External Using Reverse MII with SPI
    Memory size in MB : 16

    *** Press any key to stop auto run (1 seconds) ***
    Auto run second count down: 1
    web info: Waiting for connection on socket 0.
    CFE>
    CFE>
    CFE>
    CFE>
    CFE>
    CFE>
    CFE>
    CFE>
    CFE> flashimage nb8.bin
    Loading 192.168.1.100:nb8.bin ...
    Loading failed.: C
    *** command status = -21
    CFE> flashimage nb8.bin
    Loading 192.168.1.100:nb8.bin ...
    Finished loading 3123528 bytes
    Image flasing on block: 8
    .Image flasing on block: 9
    .Image flasing on block: 10
    .Image flasing on block: 11
    .Image flasing on block: 12
    .Image flasing on block: 13
    .Image flasing on block: 14
    .Image flasing on block: 15
    .Image flasing on block: 16
    .Image flasing on block: 17
    .Image flasing on block: 18
    .Image flasing on block: 19
    .Image flasing on block: 20
    .Image flasing on block: 21
    .Image flasing on
    .Image flasing on block: 23
    .Image flasing on block: 24
    .Image flasing on block: 25
    .Image flasing on block: 26
    .Image flasing on block: 27
    .Image flasing on block: 28
    .Image flasing on block: 29
    .Image flasing on block: 30
    .Image flasing on block: 31
    .Image flasing on block: 32
    .Image flasing on block: 33
    .Image flasing on block: 34
    .Image flasing on block: 35
    .Image flasing on block: 36
    .Image flasing on block: 37
    .Image flasing on block: 38
    .Image flasing on block: 39
    .Image flasing on block: 40
    .Image flasing on
    .Image flasing on block: 42
    .Image flasing on block: 43
    .Image flasing on block: 44
    .Image flasing on block: 45
    .Image flasing on block: 46
    .Image flasing on block: 47
    .Image flasing on block: 48
    .Image flasing on block: 49
    .Image flasing on block: 50
    .Image flasing on block: 51
    .Image flasing on block: 52
    .Image flasing on block: 53
    .Image flasing on block: 54
    .Image flasing on block: 55
    ................

    Finished flashing image.
    Resetting board...

    CFE version 1.0.37-5.17 for BCM96348 (32bit,SP,BE)
    Build Date: Mon, 31 Jan 2005 23:36:28 +0800 (root@max-redhat)
    Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

    Initializing Arena.
    Initializing Devices.
    Device id = 22a8
    totalBlks=71
    totalSize=4096K
    getShareBlks: i=70, sect_size=65536, end_blk=71
    getShareBlks: i=0, sect_size=8192, end_blk=1
    getShareBlks: i=0, sect_size=8192, end_blk=1
    fInfo.flash_nvram_start_blk = 0
    fInfo.flash_nvram_blk_offset = 0x580
    fInfo.flash_nvram_number_blk = 1
    psi startAddr = bfffa000
    fInfo.flash_persistent_start_blk = 70
    fInfo.flash_persistent_blk_offset = 0xa000
    fInfo.flash_persistent_number_blk = 1
    init 5325E: init mii=9f
    getShareBlks: i=0, sect_size=8192, end_blk=1
    CPU type 0x29107: 256MHz, Bus: 128MHz, Ref: 32MHz

    Total memory used by CFE: 0x80401000 - 0x80522040 (1183808)
    Initialized Data: 0x8041C990 - 0x8041E400 (6768)
    BSS Area: 0x8041E400 - 0x80420040 (7232)
    Local Heap: 0x80420040 - 0x80520040 (1048576)
    Stack Area: 0x80520040 - 0x80522040 (8192)
    Text (code) segment: 0x80401000 - 0x8041C990 (113040)
    Boot area (physical): 0x00523000 - 0x00563000
    Relocation Factor: I:00000000 - D:00000000

    getShareBlks: i=0, sect_size=8192, end_blk=1
    getShareBlks: i=0, sect_size=8192, end_blk=1
    Board IP address : 192.168.1.1:ffffff00
    Host IP address : 192.168.1.100
    Gateway IP address :
    Run from flash/host (f/h) : f
    Default host run file name : vmlinux
    Default host flash file name : bcm963xx_fs_kern
    Boot delay (0-9 seconds) : 1
    Board Id Name : 96348GW-11
    Psi size in KB : 24
    Number of MAC Addresses (1-32) : 11
    Base MAC Address : 00:30:da:74:9d:e5
    Ethernet PHY Type : External Using Reverse MII with SPI
    Memory size in MB : 16

    *** Press any key to stop auto run (1 seconds) ***
    Auto run second count down: 0
    Code Address: 0x80010000, Entry Address: 0x801be018
    Decompression OK!
    Entry at 0x801be018
    Closing network.
    Starting program
    Linux version 2.6.8.1 (yyl@bcm-linux.comtrend.com) (gcc version 3.4.2) #1 Wed Au
    g 16 19:32:01 CST 2006
    Parallel flash device: name MX29LV320AB, id 0x22a8, size 4096KB
    Total Flash size: 4096K with 71 sectors
    96348GW-11 prom init
    CPU revision is: 00029107
    mpi: No Card is in the PCMCIA slot
    Determined physical RAM map:
    memory: 00fa0000 @ 00000000 (usable)
    On node 0 totalpages: 4000
    DMA zone: 4000 pages, LIFO batch:1
    Normal zone: 0 pages, LIFO batch:1
    HighMem zone: 0 pages, LIFO batch:1
    Built 1 zonelists
    Kernel command line: root=31:0 ro noinitrd
    brcm mips: enabling icache and dcache...
    Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
    Primary data cache 8kB 2-way, linesize 16 bytes.
    PID hash table entries: 64 (order 6: 512 bytes)
    Using 128.000 MHz high precision timer.
    Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
    Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Memory: 13860k/16000k available (1491k kernel code, 2120k reserved, 224k data, 7
    2k init, 0k high
    Calibrating delay loop... 255.59 BogoMIPS
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Checking for 'wait' instruction... unavailable.
    NET: Registered protocol family 16
    Can't analyze prologue code at 80183604
    usbcore: registered new driver hub
    Initializing Cryptographic API
    PPP generic driver version 2.4.2
    NET: Registered protocol family 24
    Using noop io scheduler
    bcm963xx_mtd driver v1.0
    ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ohci_hcd: block sizes: ed 64 td 64
    PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
    ohci_hcd 0000:00:09.0: OHCI Host Controller
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    ohci_hcd 0000:00:09.0: irq 20, pci mem c0000b00
    ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    usbcore: registered new driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    brcmboard: brcm_board_init entry
    bcm963xx_serial driver v2.0
    NET: Registered protocol family
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 512 bind 1024)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Ebtables v2.0 registered
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    802.1Q VLAN Support v1.8 Ben Greear
    All bugs added by David S. Miller
    VFS: Mounted root (squashfs filesystem) readonly.
    Freeing unused kernel memory: 72k freed
    init started: BusyBox v1.00 (2006.08.16-11:35+0000) multi-call binary
    Algorithmics/MIPS FPU Emulator v1.5

    BusyBox v1.00 (2006.08.16-11:35+0000) Built-in shell (msh)
    Enter 'help' for a list of built-in commands.

    Loading drivers and kernel modules...

    atmapi: module license 'Proprietary' taints kernel.
    blaadd: blaa_detect entry
    adsl: adsl_init entry
    Broadcom BCMPROCFS v1.0 initialized
    Broadcom BCM6348A2 Ethernet Network Device v0.3 Aug 16 2006 19:30:52
    Config Ethernet Switch Through SPI Slave Select 1
    dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
    eth0: MAC Address: 00:30:DA:74:9D:E5
    Broadcom BCM6348A2 USB Network Device v0.4 Aug 16 2006 19:30:54
    usb0: MAC Address: 00 30 DA 74 9D E6
    usb0: Host MAC Address: 00 30 DA 74 9D E7
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
    wl0: Broadcom BCM4320 802.11 Wireless Controller 3.131.35.0.cpe2.3
    dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
    BcmAdsl_Initialize=0xC0060228, g_pFnNotifyCallback=0xC0076C34
    pSdramPHY=0xA0FFFFF8, 0x3A142 0xDEADBEEF
    eth0 Link UP.
    AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8A54
    dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
    ATM proc init !!!

    ==> Comtrend Router Software Version: A101-306NCM-C01_R05

    device usb0 entered promiscuous mode
    eth0 Link DOWN.
    eth0 Link UP.
    br0: port 1(usb0) entering learning state
    br0: topology change detected, propagating
    br0: port 1(usb0) entering forwarding state
    device eth0 entered
    br0: port 2(eth0) entering learning state
    br0: topology change detected, propagating
    br0: port 2(eth0) entering forwarding state
    Setting SSID "wireless"
    Setting SSID "Guest"
    Setting country code using abbreviation: "AU"
    wlctl: Undefined error
    wl0: current channel 11
    device wl0 entered promiscuous mode
    br0: port 3(wl0) entering learning state
    br0: topology change detected, propagating
    br0: port 3(wl0) entering forwarding state
    device wl0.1 entered promiscuous mode
    device usb0 left promiscuous mode
    br0: port 1(usb0) entering disabled state
    device usb0 entered promiscuous mode
    br0: port 1(usb0) entering learning state
    br0: topology change detected, propagating
    br0: port 1(usb0) entering forwarding state
    device eth0 left promiscuous mode
    br0: port 2(eth0) entering disabled state
    device eth0 entered promiscuous mode
    br0: port 2(eth0) entering learning state
    br0: topology change detected, propagating
    br0: port 2(eth0) entering forwarding state
    device wl0 left promiscuous mode
    br0: port 3(wl0) entering disabled state
    device wl0 entered promiscuous mode
    br0: port 3(wl0) entering learning state
    br0: topology change detected, propagating
    br0: port 3(wl0) entering forwarding state
    device wl0.1 left promiscuous mode
    br0: port 4(wl0.1) entering disabled state
    device wl0.1 entered promiscuous mode
    Scratch pad is not initialized.
    Scratch pad is not initialized.
    sntp: host not found
    ADSL device /dev/bcmadsl0 succesfully opened, fd 7.
    No scratch pad found. Initialize scratch pad...
    br0: port 1(usb0) entering disabled state
    ATM transport vpi/vci 0/16 succesfully opened, fd 8.
    Sending coldstart
    snmpEocSend(): error writing data to device, write returns -1

    Login:

    Este tema es antiguo y puede contener información obsoleta. Abre un nuevo tema para publicar tu mensaje.
    1
    • Cerrado

      [Editado 9/03/07 04:18]

      El log del firm de asus i creo que tengo el modo recuperar el…

      El log del firm de asus i creo que tengo el modo recuperar el comtrend sin puerto serie en unos dia os lo confirmo.

      FE> flashimage asus.bin
      Loading 192.168.1.100:asus.bin .
      Finished loading 3238662 bytes
      Image flasing on block: 8
      .Image flasing on block: 9
      .Image flasing on block: 10
      .Image flasing on block: 11
      .Image flasing on block: 12
      .Image flasing on block: 13
      .Image flasing on block: 14
      .Image flasing on block: 15
      .Image flasing on block: 16
      .Image flasing on block: 17
      .Image flasing on block: 18
      .Image flasing on block: 19
      .Image flasing on block: 20
      .Image flasing on block: 21
      .Image flasing on block: 22
      .Image flasing on block: 23
      .Image flasing on block: 24
      .Image flasing on
      .Image flasing on block: 26talSize=4096K
      .Image flasing on block: 27ize=65536, end_blk=71
      .Image flasing on block: 28
      getShareBlks:
      .Image flasing on block: 29k=1
      .Image flasing on block: 30eBlks: i=0, sect_size=8192,
      .Image flasing on block: 31

      .Image flasing on block: 32= 0
      .Image flasing on block: 33k_offset = 0x580
      .Image flasing on block: 34nfo.flash_nvram_number_blk
      .Image flasing on block: 35
      psi startAddr = bff
      .Image flasing on block: 36
      fInfo.flash_persistent_st
      .Image flasing on block: 37
      fInfo
      .Image flasing on block: 38 = 0xa000
      .Image flasing on block: 39fo.flash_persistent_number_
      .Image flasing on block: 40
      init 5325E
      .Image flasing on block: 41
      init 5325E: init suc
      .Image flasing on block: 42
      getShareBl
      .Image flasing on block: 43_blk=1
      .Image flasing on

      .Image flasing on block: 52
      .Image flasing on block: 53 0x80420040 - 0x8
      .Image flasing on block: 54
      .Image flasing on block: 55 Area: 0x805
      .Image flasing on block: 56
      .Image flasing on block: 57Text (code) segment:
      ..............8041C990 (1130

      Finished flashing image.
      Resetting board...rea (physical):

      CFE version 1.0.37-5.17 for BCM96348 (32bit,SP,BE)
      Relocation Factor:
      Build Date: Mon, 31 Jan 2005 23:36:28 +0800 (r

      Board IP addres
      Device id = 22a8: 192.168.1.1:ff
      totalBlks=71
      totalSize=4096K
      getShareBlks: i=70, sect_size=65536, end_blk=71.100
      getShareBlks: i=0, sect_size=8192, end_blk=1
      Run from flash/ho
      getShareBlks: i=0, sect_size=8192, end_blk=1
      Default host run file name : v
      fInfo.flash_nvram_start_blk = 0
      Default host fl
      fInfo.flash_nvram_blk_offset = 0x580
      fInfo.flash_nvram_number_blk = 1seconds) : 1
      psi startAddr = bfffa000ard Id Name
      fInfo.flash_persistent_start_blk = 70
      Psi size in
      fInfo.flash_persistent_blk_offset = 0xa000
      Number of MAC Addresses
      fInfo.flash_persistent_number

      Initialized Data: 0x8041C990 - 0x8041E400 (6768)
      Auto run second count down: 0
      BSS Area: 0x8041E400 - 0x80420040 (7232)
      Decompr
      Local Heap: 0x80420040 - 0x80520040 (1048576)
      Closing network.
      Starting program at 0
      Stack Area: 0x80520040 - 0x80522040 (8192)8.1 (yyl@bcm-linux.comtrend.com) (gcc version 3.4.2) #1 W
      Text (code) segment: 0x80401000 - 0x8041C990 (113040)
      g 16 19:32:01 CST 2006
      Boot area (physical): 0x00523000 - 029LV32
      On node 0 totalp
      Host IP address : 192.168.1.100 4000 pages, LIFO batch:1
      Gateway IP address :ges, LIFO batch:1
      Run from flash/host (f/h) : f 0 pages, LIFO batch:1
      Default host run file name : vmlinux
      Kernel command line: ro
      Default host flash file name : bcm963xx_fs_kernel
      brcm mips: enabling icache and dcache...
      Boot delay (0-9 seconds) : 1
      Primary instruction cache 16kB, p
      Board Id Name : 96348GW-11
      Psi size in KB

      Auto run second count down: 0ered promiscuous mode
      Code Address: 0x80010000, Entry Address: 0x80246018entries: 2048 (order: 1, 8192 bytes)
      Decompression OK!
      Entry at 0x80246018ogy cha
      Closing network.60k/16000k avail
      Starting program at 0x80246018reserved, 224k data, 7th0) ent
      Linux version 2.6.8.1 (brama@mp3) (gcc version 3.4.2) #1 Wed Dec 20 20:11:55 CET
      Settin
      2k init, 0k hig
      2006
      CPU revision is: 00029107:28 +080
      mpi: No Card is in the PCMCIA slot
      PPP generic driver
      Determined physical RAM map:lk=71
      memory: 00fa0000 @ 00000000 (usable)istered protocol family 24
      On node 0 totalpages: 4000ShareBlks: i=0, sect_size=
      DMA zone: 4000 pages, LIFO batch:1
      Using noop io scheduler
      Normal zone: 0 pages, LIFO batch:1, sect_size=8192, end_b
      HighMem zone: 0 pages, LIFO batch:1ci_hcd: 2004 Feb 02 USB 1.1 'Open' Ho
      Built 1 zonelistsI) Driver (PCI)bl
      Kernel command line: root=31:0 ro noinitrd

      brcm mips: enabling i
      fInf
      PID hash table entries: 64 (order 6: 512 bytes) Host Controller
      Using 128.000 MHz high precision timer.
      PCI: Setting late
      Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
      fInfo.flash_persistent_number
      Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)gistered protocol family 2(1048576)
      Memory: 13340k/16000k available (1578k kernel code, 2640k reserved, 681k data, 7 0x80520040 - 0x80522040 (8192)
      6k init, 0k highmem)
      Calibrating delay loop... 254.77 BogoMIPSed 512 bind 1024)e) segment: 0x80
      Mount-cache hash table entries: 512 (
      NET: Registered protocol family 16
      NET: Regi
      Can't analyze prologue code at 801992fc
      getShareBlks: i=0, se
      usbcore: registered new driver usbfsET: Registered protocol family 20
      usbcore: registered new driver hubrd IP
      802.1Q VLAN Support
      devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
      Host I
      devfs: boot_options: 0x1All bugs added by David
      NTFS driver 2.1.15 [Flags: R/O DEBUG].
      PPP generic driver version 2.4.2
      VFS: Mounted root (squas
      NET: Registered protocol family 24 : f
      Linux video capture interface: v1.00
      Freeing unused kernel memor
      Using noop io scheduler
      bcm963xx_mtd driver v1.0 started: BusyBox v1.00
      brcmboard: brcm_board_init entryll
      bcm963xx_serial d
      blaadd: blaa_
      TCP: Hash tables configured (established 512 bind 1024)try
      Memor
      Broadcom BCMPROCFS
      NET: Registered protocol family 1

      **
      Broadcom
      NET: Registered protocol family 170.3 Aug 16 2006 19:30:52
      Ebtables v2.0 registered
      NET: Registered protocol family 8wn: 1
      NET: Registered protocol family 20I Slave Select 1ion on socket 0.
      802.1Q VLAN Support v1.8 Ben Greear
      dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
      All bugs added by David S. Miller >
      CFE>
      CFE>
      CFE> flashimage nb8.bin
      VFS: Mounted root (squashfs filesystem) readonly.9D:E58.1.100:nb8.bin ..
      Mounted devfs
      Asus mknod Init
      getShareBlks:
      Asus mknod finish (Roly)nd_blk=71
      Using /lib/modules/2.6.8.1/extra/atmapi.kosing on block: 27
      atmapi: module license 'Proprietary' taints kernel.
      .Image flas
      Using /lib/modules/2.6.8.1/extra/blaadd.koareBlks: i=0, sect_size=8192, end_blk=1on
      blaadd: blaa_detect entry
      Using /lib/modules/2.6.8.1/extra/bcm_enet.ko bfffa000sing on block: 35
      Broadcom BCM6348A2 Ethernet Network Device v0.3 Aug 17 2006 16:02:3336
      fInfo.flash_persis
      Config Ethernet Switch Through SPI Slave Select 1
      .Image flasing on block: 38
      eth0: MAC Address: 00:30:DA:74:9D:E5rsistent_number_blk = 1ng on block:
      Using /lib/modules/2.6.8.1/extra/bcm_usb.ko
      init 5325E: init mii=0 block: 40
      Broadcom BCM6348A2 USB Network Device v0.4 Aug 17 2006 16:02:34n
      .Image flasing on block: 49
      usb0: MAC Address: 00 30 DA 74 9D E5 0x8041E400 - 0x80420
      usb0: Host MAC Address: 0
      wl0: Broadcom BCM4320 802.11 Wireless Controller 3.91.41.041C990 (113040)
      cfm init()
      Rese
      BcmAdsl_Initialize=0xC0054208, g_pFnNotifyCallback=0xC0067374 0x00523000 - 0x00563000
      AdslCoreHwReset: AdslOemDataAddr = 0xA0FF8054 : vmlinux
      dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
      Default host flash file name : bcm963xx_fs_

      ==> Bcm963xx Software Version: 3.02L.01.A2pB018e.d16f
      Boot delay (0-9 seconds

      device usb0 entered pro
      Code Address: 0
      br0: port 2(eth0) entering learning state
      eth0 Link UP.
      Dec
      br0: topology change detected, propagating
      Entry at 0x801be018
      br0: port 2(eth0) entering forwarding state
      Local Heap:
      Starting pr
      Setting country code "ALL" (1048576)
      device wl0 entered promiscuous modeux version 2.6.8.1 (yyl@bcm-linux.c
      br0: port 3(wl0) entering learning stateu20040 - 0x80522040 (8192)
      br0: topology change detected, propagating
      br0: port 3(wl0) entering forwarding state
      CPU revision is: 00029107
      infosvr start!!!

      drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
      Normal zone: 0 pages, LIFO batch:1
      br0: port 3(wl0) entering disabled statebatch:1 :
      Setting country code "ALL"ts (f/h) : f
      br0: port 3(wl0) entering learning stateline: root=31:0 ro noinitrdhost run file
      br0: topology change detected, propagating
      br0: port 3(wl0) entering forwarding statecache...host flash file name : bcm963xx
      br0: port 3(wl0) entering disabled st
      drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
      Inode-cache
      pwc: falsely claims to have parameter dev_hint
      pwc Philips webcam module version 9.0.1 loaded.n (1 secon
      nd MPC-C30,
      pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and
      VCS-UM100.
      usbcore: registered new driver Philips webcam
      SCSI subsystem initialized
      br0: port 3(wl0) entering learning state
      br0: topology change detected, propagating
      br0: port 3(wl0) entering forwarding state
      Initializing USB Mass Storage driver...
      usbcore: registered new driver usb-storage
      USB Mass Storage support registered.
      br0: port 1(usb0) entering disabled state
      br0: port 3(wl0) entering disabled state
      br0: port 3(wl0) entering learning state
      br0: topology change detected, propagating
      br0: port 3(wl0) entering forwarding state
      br0: port 3(wl0) entering disabled state
      br0: port 3(wl0) entering learning state
      br0: topology change detected, propagating
      br0: port 3(wl0) entering forwarding state
      device wl0 is already a member of a bridge; can't enslave it to bridge br0.

      Login:

    • Cerrado

      [Editado 9/03/07 02:17]

      Se me olvidava internamete es el fir este segun pone el…

      Se me olvidava internamete es el fir este segun pone el codigo
      Comtrend Router Software Version: A101-306NCM-C01_R05
      RAulito esto es para ti si no me equivoco se puede poner que carge firm desde un host con loq ue es mas seguro pa probar firm el truko esta en poner las ip fijas por defecto la ip es 192.168.1.100i cargar un tft server y si no me equivoco tambien vale para recuperar firms ya que el router hace la llamada a a esa ip por defecto en los parametros de bot (se puede cambiar)