¿que router es mejor? ¿el speedstream 5660 o el zyxel?

Hola,

Según la nota que he encontrado en la sección de soporte del fabricante dice que soporta tanto pppoa como pppoe siempre y cuando tengas el firmware que indican (firmware reciente). Solo debes poner el usuario, contraseña y VCI y VPI que te han asignado para tu conexión PPP. Te dejo la nota:

5660 - PPPoA / PPPoE Configuration

# Solution

Note: You must be running firmware 2.3.0(x) or higher for PPPoE configuration. Click here to download an image (.img)of 5660 firmware v2.3.0, Build 7.

1. Enter [10.0.0.1] in your browser URL line to access the 5660 Router Management Interface.

2. Select [Advanced Setup] on the upper left hand side of the page.

3. On the left hand side scroll down to [Configure Virtual Connection] and click it.

4. On the right hand side you will need to scroll down to select [PPP] and press [Enter].

5. Here you will need to input your VPI/VCI, username, and password. Leave the rate at default (Max).

6. After you enter your information, click [Submit]. The same page will be displayed with the username and password blank; however, at the bottom of the page it will display Request Complete, [REBOOT REQUIRED].

7. Click [REBOOT REQUIRED]. A page will come up asking if you are sure you want to reboot; Click [Yes] and [Reboot].

8. After the router has finished rebooting and all the lights are green, click [Back to Start] which will take you to the configuration summary page. You should see [PPP] displayed beside [Encapsulation Protocol].

Note: If you connect to your 5660 via HyperTerminal, use a serial cable at COM1 and enter these HyperTerminal settings:

* Bits per second: 38400
* Data bits : 8
* Parity: None
* Stop bits: 1
* Flow control: None

During reboot you will see the connection identified as [PPPoA] or [PPPoE] in the HyperTerminal window.

Saludos,
Josep