Euro-Docsis

con un cable de serie conectado a la placa del cablemodem. En el foro de fibercoax o en el foro de tcniso puedes encontrar los comandos y enlaces a los esquemas del cable. Esta todo en ingles.

un saludo.

Yo tengo un 4200i, pero en andalucia no me sirve, yo necesito el 4200e

¿Un cambio?

;-)

encontrado!

Lo que puedes hacer es un hibrido, de forma que el modem conectará a redes docsis o eurodocsis sin importarle cual sea. Aqui esta todo:

SURFboard ® Technical Bulletin STB# 02-009
New SB4100E / SB4200E Functionality
Support for both DOCSIS and Euro-DOCSIS Systems
Subject:
With the release of firmware version 0.4.4.1 the SB4100E / SB4200E now has the ability to acquire a
DOCSIS or a Euro-DOCSIS downstream channel when placed in “hybrid” mode.
Information:
Setting the cable modem to “hybrid” mode, the SB4100E / SB4200E scans the modem’s configured channel plan for
DOCSIS and Euro-DOCSIS signals. It scans each channel for 64 QAM DOCSIS, 64 QAM Euro-DOCSIS, 256 QAM DOCSIS
and 256 QAM Euro-DOCSIS.
Hybrid mode is enabled by accessing the object “cmHybridMode” (part of the giCmConfig MIB) located at OID
1.3.6.1.4.1.1166.1.19.3.1.20.
Set to true (1) to enable hybrid mode
Set to false (2) to disable hybrid mode (factory default setting, unless specified)
Example:
The SB4100E / SB4200E is configured for the frequency plan European PAL I/B/G and hybrid mode is enabled. The cable
modem will scan for a Euro-DOCSIS and DOCSIS signal at each channel that is part of the European PAL I/B/G plan. The
channel scanning algorithm used is the same regardless of whether or not a cable modem is in hybrid mode.
Note:
Enabling “hybrid” mode on an SB4100E / SB4200E may cause the initial channel scanning process time to increase, due
to the modem scanning for both DOCSIS and Euro-DOCSIS QAM signals.
The “hybrid” mode setting is retained during modem resets, as well as a modem “Reset to Defaults”. It can only be
changed using SNMP OID 1.3.6.1.4.1.1166.1.19.3.1.20. With “cmHybridMode” disabled (factory default setting), the
SB4100E / SB4200E runs in Euro-DOCSIS modem only.
The SB4200E-CN, SB4200E-CH, and SB4200E-UK can be ordered with “cmHybridMode” factory enabled.

Lo que tienes que hacer es coger el programa one step zup de TCNiSO, en la seccion snmp...

Action: set
OID: 1.3.6.1.4.1.1166.1.19.3.1.20.
New value: 1
El resto se queda igual, y le das a GO!

Todo ello te servirá si tienes un firmware 0.4.4.1 o superior, y necesitas un cable seriue conectado a la placa del circuito del cablemodem. El circuito lo tienes en tcniso.net/Nav/Tutorials/EthernetBoot/schematics.php

Espero que te sirva. Chauuu!!