Hace algunos meses leí por aquí sobre como configurar el programa "TCP/IP Optimizer" para mejorar la calidad o velocidad de las conexiones a 4 y 6 MB, pero ya no me acuerdo...
Si alguien que lo sepa fuese tan amable de explicármelo se lo agradecería.
Por si sirve de algo diré que tengo un Pentium IV a 2.4 MHz con 1 GB de RAM + XP Professional + SP2
y una conexión ADSL 6 MB de Jazztel (fui migrado de 1 a 6 hace algunos meses)
también aportaré los datos que me arroja la web:
www.speedguide.net/analyzer.php
y son los siguientes:
----------------------------------------------
MTU = 1500
MTU is fully optimized for broadband.
----------------------------------------------
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
----------------------------------------------
Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535). Windows 9x might also need the "MS Vtcp386 fix".
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
----------------------------------------------
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms
----------------------------------------------
MTU Discovery (RFC1191) = ON
----------------------------------------------
Time to live left = 116 hops
TTL value is ok.
----------------------------------------------
Timestamps (RFC1323) = OFF
----------------------------------------------
Selective Acknowledgements (RFC2018) = ON
----------------------------------------------
IP type of service field (RFC1349) = 00000000 (0)
----------------------------------------------
Y eso es todo. Gracias por adelantado.