El router es el ar-5387un:
DSL Settings
Select the modulation below.
| G.lite Enabled |
| T1.413 Enabled |
| ADSL2 Enabled |
| AnnexL Enabled |
| ADSL2+ Enabled |
| AnnexM Enabled |
Select the phone line pair below.
| Inner pair Enabled |
| Outer pair |
Capability
| Bitswap Enable |
| SRA Enable |
esto me viene asi por defecto no toque nada y estos son mis datos con faspath activado tengo 12 megas:
Statistics -- xDSL
| Mode: | ADSL_2plus | |||
| Traffic Type: | ATM | |||
| Status: | Up | |||
| Link Power State: | L0 | |||
| Downstream | Upstream | |||
| Line Coding(Trellis): | On | On | ||
| SNR Margin (0.1 dB): | 121 | 155 | ||
| Attenuation (0.1 dB): | 355 | 199 | ||
| Output Power (0.1 dBm): | 199 | 124 | ||
| Attainable Rate (Kbps): | 15988 | 1235 | ||
| Path 0 | Path 1 | |||
| Downstream | Upstream | Downstream | Upstream | |
| Rate (Kbps): | 12287 | 1023 | 0 | 0 |
| MSGc (# of bytes in overhead channel message): | 91 | 11 | 0 | 0 |
| B (# of bytes in Mux Data Frame): | 254 | 31 | 0 | 0 |
| M (# of Mux Data Frames in FEC Data Frame): | 1 | 1 | 0 | 0 |
| T (Mux Data Frames over sync bytes): | 1 | 4 | 0 | 0 |
| R (# of check bytes in FEC Data Frame): | 0 | 0 | 0 | 0 |
| S (ratio of FEC over PMD Data Frame length): | 0.6614 | 0.9922 | 0.0 | 0.0 |
| L (# of bits in PMD Data Frame): | 3084 | 258 | 0 | 0 |
| D (interleaver depth): | 1 | 1 | 0 | 0 |
| Delay (msec): | 0.16 | 0.24 | 0.0 | 0.0 |
| INP (DMT symbol): | 0.0 | 0.0 | 0.0 | 0.0 |
| Super Frames: | 0 | 0 | 0 | 0 |
| Super Frame Errors: | 14 | 0 | 0 | 0 |
| RS Words: | 0 | 2293860 | 0 | 0 |
| RS Correctable Errors: | 0 | 0 | 0 | 0 |
| RS Uncorrectable Errors: | 0 | 0 | 0 | 0 |
| HEC Errors: | 58 | 0 | 0 | 0 |
| OCD Errors: | 0 | 0 | 0 | 0 |
| LCD Errors: | 0 | 0 | 0 | 0 |
| Total Cells: | 16539124 | 1367622 | 0 | 0 |
| Data Cells: | 1037385 | 84350 | 0 | 0 |
| Bit Errors: | 0 | 0 | 0 | 0 |
| Total ES: | 12 | 0 | ||
| Total SES: | 0 | 0 | ||
| Total UAS: | 27 | 27 |
