Banda Ancha EU

Comunidad de usuarios
de fibra, móvil y ADSL

ADSL

AYUDA CON ZYXEL 870HW

BocaDePez
BocaDePez

hola necesito vuestra ayuda, mi router Zyxel P870HW-51Av2 no funciona ya que se queda la luz power parpadeando continuamente y el adsl en rojo no puedo entrar ni por web ni telnet y por teraterm he conseguido entrar con PL 2303 o Prolific USB, despues de cambiar muchas veces los cables he conseguido que se comunique con el router pero cuando me dice que puse la tecla esc no funciona el teclado y no me deja escribir el comando atur.
os dejo los datos...
(C) Copyright 2008 by ZyXEL Communications Corp.

Bootbase V2.05 | 12/30/2008 9:15:13
DRAM0 Size: 32 MB

System Memory Mapping
RAM0: 0x80000000~0x81FFFFFF (32 MB)
Bootbase: 0x80000000~0x80006A9B
Stack: 0x80006A9C~0x8000EA9B

Found EN29LV320AB at address 0xB8000000
Boot-up Bootext...

Bootext V2.05 | 12/30/2008 9:15:20
Flash Detect....
Found EON EN29LV320AB flash at memory address 0xb8000000

System Memory Mapping
Flash0: EON EN29LV320AB at 0xB8000000 (4MB; Block0~Block70)
RAM0: 0x80000000~0x81ffffff (32MB)
Bootloader: 0x80e00000~0x80e153e3
Stack: 0x80e153e4~0x80e1d3e3
Heap: 0x81c00000~0x81dfffff(free:2027520 Bytes)
Flash Temp Buffer: 0x81c00008~0x81c10007 (64KB)

Hit ESC key to stop boot-up kernel... 4 3 2 1(LE DOY A ESC Y NO HACE NADA)
Initital Ethernet:
Wait for Multiboot Service Packet... 4 3 2 1 0
Shutdown Ethernet:
Disabling Switch ports.
Flushing Receive Buffers...
0 buffers found.
Closing DMA Channels.

the vmlinux.lz's address is :0XB8339100
Booting from only image (0xb8020000) ...
Code Address: 0x80020000, Entry Address: 0x8020a000
start to decompress by decompresslzma
Decompression OK!
Linux version 2.6.21.5 (wangan@wangan.ZyXEL.com) (gcc version 4.2.3) #1 Wed Apr 7 19:32:53 CST 2010
Parallel flash device: name AM29LV320B, id 0x22f9, size 4096KB
96368VVW prom init
CPU revision is: 0002a031
Determined physical RAM map:
memory: 01f00000 @ 00000000 (usable)
On node 0 totalpages: 7936
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 30 pages used for memmap
Normal zone: 3810 pages, LIFO batch:0
Built 1 zonelists. Total pages: 7874
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 64kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (33 instructions).
Synthesized TLB store handler fastpath (33 instructions).
Synthesized TLB modify handler fastpath (32 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 200.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29136k/31744k available (1691k kernel code, 2608k reserved, 265k data, 88k init, 0k highmem)
Calibrating delay loop... 398.95 BogoMIPS (lpj=997376)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Total Flash size: 4096K with 71 sectors
File system address: 0xb8020100
registering PCI controller with io_map_base unset
BLOG v1.0 Initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
PPP generic driver version 2.4.2
NET: Registered protocol family 24
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
kerSysScreenPciDevices: 0x14e4:0x4318:(slot 1) detected

## WLAN Card Exist ##
SES: Button Interrupt 0x1 is enabled
SES: LED GPIO 0x8018 is enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xb0000100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xb0000120 (irq = 11) is a BCM63XX
bcmxtmrt: Broadcom BCM6368B2 ATM/PTM Network Device v0.1 Apr 7 2010 19:30:38
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 88k freed
init started: BusyBox v1.00 (2010.04.07-11:35+0000) multi-call binary

BusyBox v1.00 (2010.04.07-11:35+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

Loading drivers and kernel modules...

pktflow: module license 'Proprietary' taints kernel.
Broadcom Packet Flow Cache learning via BLOG enabled.
Created Proc FS /procfs/fcache
Constructed Broadcom Packet Flow Cache v0.1 Oct 9 2008 18:10:38
Broadcom Packet CMF (Experimental) Char Driver v0.1 Oct 9 2008 18:10:37 Registered<232>
Broadcom Packet CMF (Experimental) [6368-B2] v0.1 Oct 9 2008 18:10:36 Loaded
bcmxtmcfg: bcmxtmcfg_init entry
adsl: adsl_init entry
Broadcom BCMPROCFS v1.0 initialized
Broadcom BCM6368B2 Ethernet Network Device v0.1 Apr 7 2010 19:30:30
dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
Broadcom Packet CMF (Experimental) SWC RESET.
Broadcom Packet CMF (Experimental) SWC INITIALIZED.
Broadcom Packet CMF (Experimental) Forwarder Net Device 0 v0.1 Oct 9 2008 18:10:37 Registered
Broadcom Packet CMF (Experimental) Forwarder Net Device 1 v0.1 Oct 9 2008 18:10:37 Registered
Broadcom Packet CMF (Experimental) ENABLED.
eth0: MAC Address: C8:6C:87:59:DF:F5
eth1: MAC Address: C8:6C:87:59:DF:F5
eth2: MAC Address: C8:6C:87:59:DF:F5
eth3: MAC Address: C8:6C:87:59:DF:F5
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl: srom not detected, using main memory mapped srom info (wombo board)
wl0: wlc_attach: use mac addr from the system pool by id: 0x776c0000
wl0: MAC Address: C8:6C:87:59:DF:F6
wl0: Broadcom BCM4318 802.11 Wireless Controller 4.174.64.19.cpe4.402.1
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
p8021ag: p8021ag_init entry

===== Release Version 4.02L.02 (build timestamp 100407_1933) =====

Broadcom Packet CMF (Experimental) DISABLED.
Broadcom Packet Flow Cache learning via BLOG disabled.
device eth0 is not a slave of br0
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
device eth1 is not a slave of br0
device eth1 entered promiscuous mode
br0: port 2(eth1) entering learning state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
device eth2 is not a slave of br0
device eth2 entered promiscuous mode
br0: port 3(eth2) entering learning state
br0: topology change detected, propagating
br0: port 3(eth2) entering forwarding state
device eth3 is not a slave of br0
device eth3 entered promiscuous mode
br0: port 4(eth3) entering learning state
br0: topology change detected, propagating
br0: port 4(eth3) entering forwarding state
WLmngr Daemon is running
optarg=0 shmId=0
device wl0 is not a slave of br0
device wl0 entered promiscuous mode
br0: port 5(wl0) entering learning state
br0: topology change detected, propagating
br0: port 5(wl0) entering forwarding state
BcmAdsl_Initialize=0xC0095428, g_pFnNotifyCallback=0xC00B92E4
AnnexCParam=0x00000000 AnnexAParam=0x00007987 adsl2=0x00000001 vdslParam=0x007F007F vdslParam1=0x00000000
Clocks for QPROC and AFE are being aligned with step through ...
AFE is aligned, i = 036, PhaseValue = -050, PhaseCntl = 0x3FDC0000
QPROC is aligned, i = 038, PhaseValue = -050, PhaseCntl = 0x3FDC3FDA
Clocks for QPROC and AFE are aligned with syn_status AFE = 0x70, QPROC = 0x70
AFE phase control reg @0xb0f570f8 default actual = 0x0021C38F, exp = 0x0021c38f
QPRC phase control reg @0xb0f5f0c0 default actual = 0x0421C38F, exp = 0x0421c38f
pSdramPHY=0xA1FFFFF8, 0x21F1B 0xDEADBEEF
AdslCoreSharedMemInit: shareMemAvailable=236480
AdslCoreHwReset: AdslOemDataAddr = 0xA1FA3898
AnnexCParam=0x00000000 AnnexAParam=0x00007987 adsl2=0x00000001 vdslParam=0x007F007F vdslParam1=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
bcmxtmrt: MAC address: c8 6c 87 59 df f7
recovered previous ppp session info ppp0_1(00259e755f6c/0503)
CPU 0 Unable to handle kernel paging request at virtual address 0000006c, epc == c0050630, ra == c00505d0
Oops[#1]:
Cpu 0
$ 0 : 00000000 10008400 00000000 00000000
$ 4 : 00000000 00000000 00000000 7fe567e8
$ 8 : 00000020 800e5d10 00000000 fffffff8
$12 : 00000000 00000057 00000000 2ac2c8a0
$16 : 8181de50 815e1a80 7fe567fc 801c47dc
$20 : 7fe567e8 00401648 00000001 00401830
$24 : 00000000 c004f008
$28 : 8181c000 8181de40 7fe567b8 c00505d0
Hi : 00000001
Lo : 00000000
epc : c0050630 Tainted: P
ra : c00505d0 Status: 10008403 KERNEL EXL IE
Cause : 00000008
BadVA : 0000006c
PrId : 0002a031
Modules linked in: p8021ag(P) wl(P) bcm_enet(P) bcmprocfs(P) adsldd(P) bcmxtmcfg(P) pktcmf(P) pktflow(P)
Process ssk (pid: 113, threadinfo=8181c000, task=81e22820)
Stack : 544500c8 2abdd4cc 00000003 2ac2c8a0 000002f0 0000be3c 7fe567f8 00000000
7fe567e8 803c0d60 7fe567e8 c00ce30b 7fe56e94 c004f07c ffffff9c 00401648
00000000 00401830 c004f5e0 c004f4fc c004f490 c0051fa0 c0051bb8 c00507e0
c004fc70 c004f884 c004f094 c005260c c0052774 c00504e0 c004fed8 c0050150
c0050318 c004f6d4 00000000 810663f8 8008b6bc 00000000 ffffff9c 00401648
...
Call Trace:[][][][][][][][][][][][][][][][][][<8008b6bc>][<8007c8fc>][<800862bc>][<8008b73c>][<8007cd74>][<8007dfd4>][<800286e0>][<800286e0>]

Code: ae230008 97a20014 a622000c <8c62006c> 10400009 00000000 8c430004 10600003 00000000
wlctl -i wl0 phytype > /var/wl0
wlctl -i wl0 revinfo > /var/wl0
wlctl -i wl0 bands > /var/wl0bands
wlctl ver > /var/wlver
wlctl -i wl0 cap > /var/wl0cap
smd:error:8.039:collectApp:1183:ssk (pid 113) exited due to uncaught signal number 11
smd:error:8.039:oal_processEvents:668:ssk has died. smd must exit now!
pppd:error:8.039:sendAndGetReply:155:error during get of reply, ret=9810
smd:error:8.040:oalShm_cleanup:307:shmctl IPC_STAT failed
dhcpd:error:8.040:udhcpd:827:lost connection to smd, exiting now.
# br0: port 5(wl0) entering disabled state
InValid Device Pin in CFE
WPS Device PIN = 11866428
wlctl -i wl0 phy_watchdog 0
wlctl -i wl0 wds none
wlctl -i wl0 up
wlctl -i wl0 down
wlctl -i wl0 mbss 0
wlctl -i wl0 bss -C 0 down
wlctl -i wl0 bss -C 1 down
wlctl -i wl0 bss -C 2 down
wlctl -i wl0 bss -C 3 down
wlctl -i wl0 ssid -C 0 EIKOSTATE
Setting SSID "EIKOSTATE"
wlctl -i wl0 ssid -C 1 wl0_Guest1
Setting SSID "wl0_Guest1"
wlctl -i wl0 ssid -C 2 wl0_Guest2
Setting SSID "wl0_Guest2"
wlctl -i wl0 ssid -C 3 wl0_Guest3
Setting SSID "wl0_Guest3"
wlctl -i wl0 cur_etheraddr C8:6C:87:59:DF:F6 2>/dev/null
wlctl -i wl0.1 cur_etheraddr 5a:6c:87:59:df:f7 2>/dev/null
wlctl -i wl0.2 cur_etheraddr 5a:6c:87:59:df:f4 2>/dev/null
wlctl -i wl0.3 cur_etheraddr 5a:6c:87:59:df:f5 2>/dev/null
wlctl -i wl0 ap 1
wlctl -i wl0 closed 0
wlctl -i wl0 country ES
Setting country code using abbreviation: "ES"
wlctl -i wl0 band b
wlctl -i wl0 regulatory 0
wlctl -i wl0 radar 0 2>/dev/null
wlctl -i wl0 spect 0 2>/dev/null
wlctl -i wl0 channel 4
wlctl -i wl0 wpa_cap -C 0 > /var/wpa_cap0
wlctl -i wl0 wpa_cap -C 0 0 2>/dev/null
wlctl -i wl0 wpa_cap -C 1 > /var/wpa_cap0
wlctl -i wl0 wpa_cap -C 1 0 2>/dev/null
wlctl -i wl0 wpa_cap -C 2 > /var/wpa_cap0
wlctl -i wl0 wpa_cap -C 2 0 2>/dev/null
wlctl -i wl0 wpa_cap -C 3 > /var/wpa_cap0
wlctl: Unsupported
wlctl -i wl0 wpa_cap -C 3 0 2>/dev/null
wlctl -i wl0 maxassoc 3
wlctl -i wl0 bss_maxassoc 3
wlctl -i wl0 gmode Auto
wlctl -i wl0 gmode_protection_override -1
wlctl -i wl0 gmode_protection_control 2
wlctl -i wl0 wme 0 2>br0: port 5(wl0) entering learning state
/dev/null
wlctlbr0: topology change detected, propagating
-i wl0 afterburbr0: port 5(wl0) entering forwarding state
ner_override 0 2>/dev/null
wlctl -i wl0 ampdu 0
wlctl -i wl0 amsdu 0
wlctl -i wl0 afterburner_override -1
wlctl -i wl0 wme -1 2>/dev/null
wlctl -i wl0 wme_noack 0 2>/dev/null
wlctl -i wl0 wme_apsd 0 2>/dev/null
wlctl -i wl0 wme_bss_disable 1
wlctl -i wl0 plcphdr long
wlctl -i wl0 rate 0
wlctl -i wl0 bg_rate 0
wlctl -i wl0 leddc 0 2>/dev/null
wlctl -i wl0 bg_mrate 18.0
wlctl -i wl0 rateset default
wlctl -i wl0 rtsthresh 2344
wlctl -i wl0 fragthresh 2344
wlctl -i wl0 dtim 1
wlctl -i wl0 bi 100
wlctl -i wl0 frameburst 0
wlctl -i wl0 ap_isolate 0
wlctl -i wl0 wds none
wlctl -i wl0 pwr_percent 100
wlctl -i wl0 mac none
wlctl -i wl0 macmode 0
wlctl -i wl0 lazywds 0
wlctl -i wl0 wds
wlctl -i wl0 antdiv 0
wlctl -i wl0 txant 0
wlctl -i wl0 up
wlctl -i wl0 csscantimer 0
wlctl -i wl0 channel > /var/curchannel0
device wl0 left promiscuous mode
br0: port 5(wl0) entering disabled state
device wl0 is not a slave of br0
device wl0 entered promiscuous mode
br0: port 5(wl0) entering learning state
br0: topology change detected, propagating
br0: port 5(wl0) entering forwarding state
device wl0.1 is not a slave of br0
device wl0.2 is not a slave of br0
device wl0.3 is not a slave of br0

cuando me dice esto Hit ESC key to stop boot-up kernel le doy a ESC y no para el boot y no me deja escribir el comando atur para subir la rom, necesito vuestra ayuda muchas gracias..

👁 734